Conversor Pro

Read reviews (1)

Choose your options

Conversor Pro helps you to hear better in difficult or noisy environments such as a restaurant, meeting place or conference or lecture hall. Conversor Pro also helps you to hear better when listening to the TV. Hearing aids aren't always at their best in busy environments with a lot of background noise.

Conversor Pro helps you to focus on the speaker’s voice and reduce the effects of room acoustics and background noise. With the Conversor Pro, your desired sounds are clearer and more intelligible so you can feel free to take a more active part in everyday situations. To use this product with a hearing aid, the aid must have T setting capabilities. The Conversor Pro can also be used with headphones or earphones.

You can be up to 40 metres (120 feet) from the speaker indoors and over twice that distance outdoors. Conversor Pro is a versatile wireless FM assistive listening device that provides enhanced sound level and clarity for hard of hearing users. Consisting of a powerful handheld or free-standing microphone and a lightweight pendant receiver that is worn around the neck, the Conversor Pro is easy to use. It can be used both to channel one particular sound source, such as a speaker, and also surrounding voices if needed; particularly useful in group scenarios.

Technical information
FCC ID: QA6CONVERSPRO – complies with Part 15 of the FCC rules.

Housing:                                 Plastic. Matt black finish.
Dimensions:                           10.2cm (L) x 3.3cm (W) x 2.3cm (D)
Weight:                                   67 g.
VHF Frequencies:                  Channels between 169.4000 – 216.9999MHz
Channel Selection:                PLL Synthesizer
Battery Type:                          Rechargeable Li-Ion single cell
Charge life:                              8 hours approx. Red LED battery warning
Charge Time:                           2hrs from full discharge can be topped up
RF Power and Range:             <10mW Outside; up to 300 feet.Inside; 90 to 150 feet typical
Mic muting:                             Mic muted when line input is connected
Modulation:                             FM
Maximum Deviation:              +/- 15 kHz
Spurious Emission:                  Below maximum ETSI permitted limits
Frequency Stability:                < +/-5kHz (0-40 degrees Celsius)
Frequency Response:              +/- 3dB between 300Hz – 4kHz with resistive load
Microphone:                            Switchable omni / unidirectional Electret microphones
Omni Field:                               Sensitive to all directions
Front to Back Ratio:               Up to 30dB reduction of rearward sound @1kHz and up to 15dB reduction to the sides
Line Input Sensitivity:            100mV RMS @ 10kohms, stereo mini-jack
Sensitivity:                                Soft-limited, two threshold levels for both line and microphone inputs.
Battery Indicator Light:         Light changes from green to red, indicating 25% battery capacity remaining

Housing:                                 Plastic. Matt black finish.
Dimensions:                           6.5cm (L) x 3.4cm (W) x 1.7cm (D)
Weight:                                   61 g.
VHF Frequencies:                  Channels between 169.4000 -216.9999 MHz
Channel Selection:               PLL Synthesizer. Pro auto-tune (PRAT TM) for class selection in school application
Squelch:                                   PSSS TM circuitry switches off audio and switches on local microphone when there is no transmission
Receive Indicator:                 LED indication of received signal
Battery Type:                          Rechargeable Li-Ion cell
Charge life:                             8 hours approx operation. LED changes from green to red as capacity drops to 25%
Charge Time:                          2hrs from full discharge, can be topped up, can be used for 1 hr after a 15min charge.
Frequency Stability:              < +/-5kHz (0-40 degrees Celsius)
Frequency Response:            +/- 3dB between 300Hz – 4kHz with resistive load
Audio Output:                         3.5mm 3-pole (stereo) jack socket
Distortion:                                <5% at max volume (typical <1%)
S/N ratio:                                  > 50dB
Load Impedance:                    32 Ohms
Integral Inductive Loop:       Inductive field meets BS 6083 Part 4 in appropriate mode.

For more information and support on adjusting to hearing loss, please visit our website here.
Code CON01

Customer Reviews

5 stars based on 1 review

I recently purchased a Conversor Pro and would like to share my experience.

I have no hearing in one ear and considerable loss in the other. As a result, I am always struggling with conversations, particularly in a group situation.

I have tried other assistive devices to improve my ability to hear in group and one to one situations, with varying degrees of success. My order was easy to place and within a few days I received the product.

My first trial was in a very noisy pub and I was surprised how much background noise it eliminated. I also realised that I had dropped my own voice level, which was a relief, as such situations tend to make me speak louder to compensate.

I then tried it at supper with friends and on a one to one in noisy cafés and not only was the feedback very positive, but I felt more engaged with the conversation instead of largely guessing or simply giving up. I like the simplicity of operation and the more natural sound the device provides compared to other devices.

In sum, I feel it is a very good aid at a very affordable price. I would certainly recommend trying it.