Conversor TV Pro
Conversor TV Pro
Conversor TV Pro
Conversor TV Pro
Conversor TV Pro

TV Pro

Conversor TV Pro
£199.00
Conversor TV Pro is an ideal companion for watching the television or listening to radio at home. TV Pro can help you to hear the TV more clearly. Many TVs do not have sound systems that are compatible with individuals who have a hearing loss. The speakers are either pointing at the floor or are at the back of the TV making it difficult to hear clearly without turning the volume up. Conversor TV Pro is a wireless listening device which lets you listen to the television or other audio source without increasing the volume on the television and irritating other viewers or listeners. Simply connect the mains power, plug the TV Pro transmitter into the television, place the pendant receiver around the neck, switch the hearing aid to the telecoil setting and listen through the hearing aid or just plug in a set of headphones or earphones.

Conversor TV Pro Technical Specifications

Transmitter
Housing:                                  Plastic. Matt black finish.
Dimensions:                            10.2cm (L) x 3.3cm (W) x 2.3cm (D)
Weight:                                    67 g.
VHF Frequencies:                   Channels between 216.0000 – 216.9999MHz
Channel Selection:                  PLL Synthesizer
Operating voltage:                  4.6V DC through standard mains connected PSU.
RF Power and Range:            <10mW ; Inside - 90 to 150 feet typical
Mic muting:                             Mic muted when line input is connected
Modulation:                             FM
Maximum Deviation:              +/- 15 kHz
Spurious Emission:                 Below maximum ETSI permitted limits
Frequency Stability:                < +/-5kHz (0-40 degrees Celsius)
Frequency Response:            +/- 3dB between 300Hz – 4kHz with resistive load
Line Input Sensitivity:              100mV RMS @ 10kohms, stereo mini-jack
Sensitivity:                               Soft-limited, two threshold levels line inputs.

Receiver
Housing:                                  Plastic. Matt black finish.
Dimensions:                            6.5cm (L) x 3.4cm (W) x 1.7cm (D)
Weight:                                    61 g.
VHF Frequencies:                   Channels between 216.0000 -216.9999 MHz
Channel Selection:                  PLL Synthesizer. Pro auto-tune (PRAT TM) for class selection in school application
Squelch:                                 PSSS TM circuitry switches off audio and switches on local microphone when there is no transmission
Receive Indicator:                   LED indication of received signal
Battery Type:                          Rechargeable Li-Ion cell
Charge life:                             10 hours approx operation. LED changes from green to red as capacity drops to 25%
Charge Time:                          2hrs from full discharge, can be topped up, can be used for 1 hr after a 15min charge.
Frequency Stability:                < +/-5kHz (0-40 degrees Celsius)
Frequency Response:            +/- 3dB between 300Hz – 4kHz with resistive load
Audio Output:                          3.5mm 3-pole (stereo) jack socket
Distortion:                                <5% at max volume (typical <1%)
S/N ratio:                                 > 50dB
Load Impedance:                    32 Ohms
Integral Inductive Loop:          Inductive field meets BS 6083 Part 4 in appropriate mode.
Code CON02

Customer Reviews

Be the first to review this product.